Cylinder Kit 200Z 63.5mm Standard Bore Top End Kit with 15mm Piston Pin for Italika 200Z / Loncin RE200 / AKT TTR200 CR5 200 / Honda CBX200 — 77A0 Cylinder, 196cc
-
⚠️ CRITICAL: 15mm Pin — Verify Before Ordering: This kit uses a 15mm piston pin (φ15×47.5 with G-clip). Do NOT confuse with the Italika 170Z kit which shares the Z-series naming but uses a 14mm pin. These are NOT interchangeable. Confirmed fitment for Italika 200Z, Loncin RE200, AKT TTR200, AKT CR5 200, and Honda CBX200 .
-
Precise Cylinder Specifications: Bore: Φ63.5mm | Sleeve outer diameter: 68.77mm | Deck height: 76mm | Total height: 104mm. Displacement: 196cm³. Finish: Matte Black. 77A0 cylinder casting. Matches the 196cc engine displacement of the Italika 200Z .
-
Matched Piston & Ring Set: Piston outer diameter: 63.5mm | Short skirt, flat top design | Total height: 45.5mm | Ring grooves: 1.0-1.0-2.5mm | Pin: φ15×47.5mm with G-clip. Piston rings: 63.5mm diameter, thickness 1.0-1.0-2.5mm (77A0 specification).
-
Gaskets Included: Metal head gasket 0.25mm thickness, sized for CB200 63.5mm bore. Base gasket included. Using the correct metal head gasket is essential for maintaining compression and heat transfer.
Product Description :
This Cylinder Kit 200Z is a standard bore top-end rebuild kit engineered for the Italika 200Z and cross-compatible with Loncin RE200, AKT TTR200, AKT CR5 200, and Honda CBX200 models. It features a 63.5mm cylinder bore with a 68.77mm sleeve outer diameter, matched to a piston using a 15mm wrist pin.
The kit includes the 77A0-specification cylinder finished in Matte Black, a matched 63.5mm short-skirt flat-top piston with 45.5mm total height and 1.0-1.0-2.5mm ring grooves, a 77A0 piston ring set, and the correct gaskets: a 0.25mm metal head gasket (CB200 63.5mm bore) and base gasket.
⚠️ Critical Fitment Warning — Piston Pin Diameter: The Italika Z-series platform uses different pin sizes across displacement classes. This 200Z kit uses a 15mm pin. The 170Z model uses a 14mm pin, and the DT150/FT150 models use a 13mm pin. These are NOT interchangeable. This kit will NOT fit 170Z, DT150, or FT150 models. Please measure your original wrist pin before ordering.












Reviews
There are no reviews yet.