Cylinder Kit 170Z 62mm Standard Bore Top End Kit with 14mm Piston Pin for Italika 170Z / AKT CR4 / RE162 / CB150 — 62mm Bore, 149cc Class
-
⚠️ CRITICAL: 14mm Pin — Verify Before Ordering: This kit uses a 14mm piston pin (φ14×47). Do NOT confuse with the DT150/FT150 kit which shares the same 62mm bore but uses a 13mm pin. These are NOT interchangeable. Measure your original pin diameter before purchase. Confirmed fitment for Italika 170Z, AKT CR4, RE162, and CB150 .
-
Precise Cylinder Specifications: Bore: 62mm | Sleeve outer diameter: 68.48mm | Deck height: 68.69mm | Total height: 96.28mm. Standard bore replacement for the 170Z platform.
-
Matched Piston & Ring Set: Piston outer diameter: 62mm | Total height: 40mm | Ring grooves: 0.8-0.8-1.5mm | Pin: φ14×47mm. Piston rings: 62mm diameter, thickness 0.8-0.8-1.5mm. All critical wear components matched as a set.
-
Confirmed Compatibility: Designed for the Italika 170Z and cross-compatible with AKT CR4, RE162, and CB150 models using the 62mm bore / 14mm pin configuration. Verify your specific model year and engine code before ordering .
Product Description :
This Cylinder Kit 170Z is a standard bore top-end rebuild kit engineered for the Italika 170Z and compatible AKT CR4, RE162, and CB150 models. It features a 62mm cylinder bore with a 68.48mm sleeve outer diameter, matched to a piston using a 14mm wrist pin.
The kit includes a matched 62mm piston with 40mm total height and 0.8-0.8-1.5mm ring grooves, a piston ring set, and the φ14×47mm wrist pin.
⚠️ Critical Fitment Warning — Piston Pin Diameter: The 62mm bore size is shared by multiple engine families, but piston pin diameter is the decisive differentiator. This 170Z kit uses a 14mm pin. The Italika DT150/FT150 platform also uses a 62mm bore but requires a 13mm pin. This kit will NOT fit DT150 or FT150 models. Please measure your original wrist pin before ordering.











Reviews
There are no reviews yet.